FHA Condo Approval: How to Check a Condo and What Single-Unit Approval Means

Blank binders and a pen on a tiled ledge in the courtyard of a low-rise Southern California condominium building
FHA looks at the whole condominium project, not only the unit, so it pays to check a complex before you write an offer.

FHA condo approval is HUD’s confirmation that a condominium project, or one unit inside it, meets the rules for an FHA-insured mortgage. A unit qualifies in one of two main ways: the whole project is on HUD’s list of approved condominiums, or the lender approves that single unit through Single-Unit Approval. Both routes look at the homeowners association’s finances, insurance, owner occupancy and how many units already carry FHA loans. This guide covers what approval means, how to check a condo, the requirements, Single-Unit Approval, why projects fail and how an association applies.

What is FHA condo approval?

FHA condo approval is the review that makes a condominium unit eligible for FHA mortgage insurance. Under 24 CFR 203.43b, a unit must sit in a project approved by HUD or by an authorized lender, or qualify as a site condominium or through Single-Unit Approval. HUD approves a project for 3 years from the date it is placed on the approved list. The two main routes compare as follows, based on the current HUD Handbook 4000.1 (update published August 12, 2026).

FHA condo project approval vs Single-Unit Approval
FeatureProject approvalSingle-Unit Approval
What is approvedThe whole condominium projectOne unit in a project that is not on the approved list
Who reviews itHUD staff (HRAP) or a lender with DELRAP authorityThe buyer’s FHA lender, as part of the loan
How long it lasts3 years, then recertificationThat one loan only
FHA loans allowed in the projectUp to 50% of unitsUp to 10% of units in projects of 20 or more; no more than 2 FHA loans in smaller projects
Owner occupancy (existing projects)At least 50% (35% to 50% allowed with conditions)At least 50%
HUD formHUD-9992, project approval questionnaireHUD-9991, loan level and Single-Unit Approval questionnaire

How do you check if a condo is FHA approved?

You check if a condo is FHA approved by searching the project on HUD’s FHA condominium search, the public list of approved, expired, rejected and withdrawn projects. The steps are:

  1. Open the search page and set State to California.
  2. Enter the county, such as Orange or Riverside, or the city or ZIP code of the condo.
  3. Add part of the project name only if you know how the project is listed, because a name that does not match returns no result.
  4. Set Status to All so you see expired and withdrawn records too, then sort by Condo Name or City.
  5. Read the status and dates, and note the Condo ID for your lender.

If nothing comes up, enter fewer fields; HUD notes that “the less information entered, the larger the resulting list.” Your lender rechecks the status when it orders the FHA case number.

What do Approved, Expired, Rejected and Withdrawn mean?

Approved, Expired, Rejected and Withdrawn are the four status values on HUD’s condo search. Approved means the project can take FHA loans now. Expired means a 3-year approval lapsed; the Handbook lets an association recertify from 6 months before to 6 months after the expiration date, and after that it must apply for a full review. Rejected and Withdrawn mean an application did not end in approval, so ask the lender why before relying on Single-Unit Approval.

What are the FHA condo approval requirements?

The FHA condo approval requirements cover the project’s legal setup, finances, occupancy, insurance and use. The main standards in Handbook 4000.1 for project approval are listed below.

  • FHA concentration: FHA may suspend a project’s eligibility when more than 50% of its units carry FHA-insured loans.
  • Owner occupancy: at least 50% of units in an existing project, or at least 30% in a newly completed project. A project older than 12 months with 35% to less than 50% can still be approved through HUD review if no more than 10% of units are behind on dues.
  • Reserves: a reserve account for capital expenditures and deferred maintenance funded with at least 10% of 12 months of unit assessments, unless an acceptable reserve study supports less, and no more than 15% of units behind on dues.
  • Commercial space: no more than 35% of total floor area, with a limited exception up to 49%.
  • Control: recorded CC&Rs, with control transferred from the developer to the owners.
  • Ineligible types: condotels, timeshares, cooperatives, houseboat projects, continuing care facilities and projects with mandatory rental pooling cannot be approved.

The project also needs master hazard and liability insurance, fidelity coverage above 20 units, and no sponsor litigation over safety or structural soundness. Owner occupancy has its own counting rule.

How does FHA count owner-occupied units?

FHA counts a unit as owner-occupied when the owner lives in it for any part of the calendar year and does not rent it for most of the year. Second homes used by their owners count; units held by the builder or developer do not.

What is FHA Single-Unit Approval?

FHA Single-Unit Approval is the process that lets a lender approve one unit for an FHA loan in a condominium project that is not on HUD’s approved list. The final rule published August 15, 2019, created it, and section 203.43b(i) sets its basic limits. Many buyers still call it spot approval. The lender reviews the project on form HUD-9991, and the approval covers only that loan.

What are the Single-Unit Approval requirements?

The Single-Unit Approval requirements are stricter than project approval on FHA concentration and similar on finances. Under the current Handbook, the lender must confirm that:

  • Loan file: the loan receives an Accept from FHA’s TOTAL Mortgage Scorecard, or a manually underwritten loan stays at or below 90% loan-to-value.
  • Project size and age: at least five units, and a subject unit whose certificate of occupancy is at least one year old or that has been occupied.
  • FHA concentration: no more than 10% of units carry FHA loans in a project of 20 or more units, and no more than two FHA loans in a smaller project.
  • Owner occupancy: at least 50% of all units.
  • Single owner limit: no one owns more than 10% of units in a project of 20 or more units; in a smaller project, no owner may hold more than one unit.
  • Finances: reserves funded with at least 10% of monthly assessments, no more than 15% of units in arrears, and no bankruptcy, receivership or foreclosure of the project in the last three years.
  • Property type: no manufactured housing, no ineligible characteristics, and commercial space of 35% of floor area or less.

The buyer also needs a walls-in (HO-6) policy when the master policy does not cover the unit’s interior. A failed test usually points to the same issue that keeps the project off the list.

Why would a condo not be FHA approved?

A condo is usually not FHA approved because the association never applied, its approval expired, or the project fails one of HUD’s standards. Project approval happens only when the association, builder or another eligible party submits an application, and FHA does not pay any fees for the review. Common reasons a project stays off the list are:

  • No application or a lapsed approval: the association did not apply or did not recertify within 6 months of expiration.
  • Too many rentals: owner occupancy below the 50% standard, or below 35% even with the exception.
  • Too many FHA loans: FHA concentration above 50% of units.
  • Weak finances: reserves below 10% without a supporting reserve study, or too many owners behind on dues.
  • Project type: a condotel, timeshare or mandatory rental pool, or commercial space above the limit.
  • Litigation or insurance gaps: a lawsuit over safety or structural soundness, litigation risk beyond the insurance coverage, or master insurance that falls short.

An association can fix some of these and then apply.

How does a condo get FHA approved?

A condo gets FHA approved when an eligible party submits a complete application package to HUD, or to a lender with DELRAP authority, and the project meets every standard. Handbook 4000.1 accepts requests from a lender, builder, developer, association, management company, project consultant or their attorney. The package goes to the FHA Resource Center as a single PDF in a set order, starting with a cover letter and form HUD-9992, then legal, financial, contract, insurance and litigation documents.

What HOA documents are needed for FHA condo approval?

The HOA documents needed for FHA condo approval include the recorded CC&Rs or declaration and all amendments, the recorded plat, signed bylaws, the board-approved budget, a year-to-date income statement, a balance sheet dated within 90 days, a reserve study if reserves are below 10%, insurance certificates and a signed explanation of any litigation. A recertification can skip the recorded CC&Rs, plat, bylaws and articles if they have not been amended.

How long does FHA condo approval last?

FHA condo approval lasts 3 years from the date the project is placed on HUD’s list, unless HUD says otherwise in writing or rescinds it, under 24 CFR 203.43b(h)(3). Handbook 4000.1 sets no review deadline for a new project application, so a buyer under contract usually asks about Single-Unit Approval instead.

How does FHA condo approval differ from a warrantable condo?

FHA condo approval differs from a warrantable condo because HUD sets the FHA rules, while Fannie Mae and Freddie Mac set the conventional rules behind the word warrantable. A project can meet one set and fail the other. The guide to warrantable vs non-warrantable condos covers the conventional side. VA keeps its own approved list as well, on the VA condo report.

Frequently asked questions

Can you buy a condo with an FHA loan?

Yes. You can buy a condo with an FHA loan when the project is FHA-approved or the unit qualifies for Single-Unit Approval, and the loan meets FHA’s normal borrower rules. The page on FHA home loans in Orange County covers down payment and credit, and FHA loans in Santa Ana shows a condo-heavy city.

Do FHA loan limits apply to condos?

Yes. A condo uses the one-unit FHA limit for its county: $1,249,125 in Orange County and $690,000 in Riverside County for 2026. The 2027 limits are expected to be announced late in 2026. The guide to FHA loan limits in Orange County and Riverside County has the full table.

Does an FHA Streamline Refinance need condo approval?

No. Handbook 4000.1 says Streamline Refinances do not require project approval or Single-Unit Approval, although the lender enters the project’s FHA Condo ID if it has one. The page on FHA streamline loans in Riverside County explains the refinance itself.

Is a VA-approved condo also FHA approved?

No, not automatically. HUD and VA keep separate condo lists, so a project can appear on one and not the other.

Can a first-time buyer use Single-Unit Approval?

Yes. Single-Unit Approval depends on the project and the loan file, not on whether you have owned a home before. First-time buyers in the Inland Empire can read more on FHA loans for first-time buyers in Riverside County.

Talk through an FHA condo purchase with Newport Capital Funding

Newport Capital Funding works with condo buyers across Orange County and Riverside County from Newport Beach. Bring the project name, the HOA contact or management company and the listing. Contact Newport Capital Funding and we can check the HUD list, look at whether Single-Unit Approval fits and tell you what the lender will ask the association for.

This page provides general information. Eligibility, rates and terms depend on the borrower, property, loan program and current underwriting review. Program details and limits can change. It is not tax or legal advice. NMLS ID# 1041553.